Category Archives: LED Lights
Baja Designs is attending
Stadium Super Trucks!
|The Scientists’ of Lighting at Baja Designs would like to invite you to join them at an awesome new event series, Robby Gordon’s Stadium Super Trucks. Baja Designs is very excited to be a part of the event; located in San Diego’s Qualcomm Stadium, as a vendor they are happy to represent quality U.S.A. made LED lighting at this promising new race series.
“Stadium racing helped Jimmie Johnson, Casey Mears and myself launch our careers,” said Robby Gordon, President of SST. “Bringing off-road racing back to the stadium like Mickey Thompson did has been something that I have wanted to do for a long time, and I am proud to say that we have finally accomplished it. SST offers attractive racing venues, remarkable track designs, substantial purse, and opportunity for network TV a lot like NASCAR because you can visualize the whole track.”
Baja Designs will be equipped with a variation of products and the Scientists will be more than happy to answer any and all lighting questions. Come stop by our booth in the PIT section of the stadium for exciting discounts and prizes, just look for the labcoats! For more information on Stadium Super Trucks, events, and racers please follow this link.
Baja Designs’ Scientists Evolve uService™ LED Lighting Systems
SAN MARCOS, CA – Baja Designs (BD) has always engineered and manufactured LED lighting systems with replaceable lenses and optics. Amazingly enough, almost all other LED bars are silicone sealed and not serviceable. If a BD lens is scratched or scored, you don’t replace the entire light as you do with most imported products, nor do you need to send it back to the manufacturer as you would with other popular LED lights.
BD’s uService™ technology allows you to simply unscrew BD’s water and dust proof lens and seal to replace the damaged optics or lens. On top of that, the same uService™ technology means you can also change the optics of your light. When you consider that BD also includes a limited lifetime warranty on all their lights, uService™ offers the ultimate in purchase protection.
“Racing off-road for over 25 years has taught BD engineers to design products to endure even the roughest of conditions. Our uService™ replaceable lenses and optics will further guarantee a race finish while also saving you money from needing to buy a replacement light,” says Chief Scientist and Baja Designs founder, Alan Roach. Alan also added, “You wouldn’t throw out your car if your windshield cracks, would you? No, you’d just replace the windshield. So why would anyone design a disposable LED driving light? That’s crazy!”
Baja Designs has also evolved the uService™ technology to permit “customization.” Replaceable lenses and optics allow you to customize your pattern for any application on the fly or make repairs quickly and easily. BD’s uService™ products are uniquely o-ring sealed and carry an IP69K rating – that means they are submersible up to 9 feet and pressure washer-safe up to 1450 PSI. Catch the company’s YouTube video featuring Zog the Caveman attempting to rebuild his disposable lights while the Baja Designs Scientist easily breezes through his rebuilding process in minutes.
Look for the uService™ icon on all applicable LED products from Baja Designs. More product news from Baja Designs in the upcoming months will reveal a complete series of innovations designed to continually bring you a re-evolution of bright ideas made better.
|The Baja Designs SII Polisport Kit is the newest and only LED light of its size available for motorcycle use. “Bright, Tiny, and Rugged”. We have mounted our award winning SII LED light in a sleek Polisport headlight shell. This light packs an amazing 1800 Lumens while using a mere 22 watts (1.8 amps) of power. This means that even EFI MX bikes can now run an insanely bright headlight with zero stator modifications. If you are looking for the smallest and brightest motorcycle light on the market with 20 years of motorcycle light manufacturing at its finest, then Baja Designs SII Polisport Kit is your answer!|
“With the SII, we finally have a high performance headlight for even the weakest motorcycle charging systems.” says head scientist Alan Roach.
The SII proves that big things do come in small packages. The SII motorcycle light offers an incredible 1800 lumens out of a tiny 3”x 2” housing. Our SII is THE brightest LED light ounce for ounce on the market because it contains the brightest LEDs on the market – 2 CREE T6 bin XM-L LEDs at 5000k color temperature. The SII is designed specifically for comfortable night-time riding. Three patterns are available, a combo/driving pattern, a spot pattern, and a full driving light pattern. Our uService technology allows you to change the front lens and even change the pattern of your light. The SII is designed, engineered, manufactured, and built in California as well as backed by Baja Designs’ limited lifetime warranty. If you are looking for the smallest and brightest LED light on the market the SII motorcycle light is for you!
-Many carbureted motorcycles require a stator rewind or an aftermarket stator to run this headlight. Please contact Baja Designs at 760.560.2252 to have this service performed. Cost for a rewind is $150, 3-5 day turnaround time. An aftermarket stator for most motocross bikes retails for $179.
The Scientists of Lighting at Baja Designs would like to thank all of their sponsored KOH race teams and congratulate Bomber Fabrication’s Randy Slawson for an amazing victory at this year’s 2013 Griffin King of the Hammers race. A long week of preparation and pre-running culminated in a very exciting race on Friday. This year’s KOH was witnessed by a record crowd out at Hammertown and an even larger following via the live internet broadcast. Staying true to its name, King of the Hammers was more relentless and unforgiving than ever before, allowing just 27 finishers out of 129 racers.
Bomber Fabrication’s Randy Slawson had this to say, “We chose to outfit our Bomber Fabrication race car #4448 with two Squadron Wide-Corning lights and one 8″ OnX LED Light bar (with all spot reflectors). This combination allowed us to tune our suspension well into the night in preparation for our bid at the 2013 King of the Hammers. End result, on February 8, 2013 we were crowned “King” of the 2013 King of the Hammers. We highly recommend Baja Designs lighting systems for race applications, recreation off-roading and expedition excursions.”
The Scientists of Lighting – at Baja Designs are thrilled to be part of the 2013 King of the Hammers spectacle. Ultra 4 racing has become well known as one of the toughest race series in the United States and King of the Hammers is the granddaddy of them all. The scientists of Baja Designs will have a booth setup so everyone can see their lights, including the new OnX LED that provides the distance of an HID with the smoothness of an LED. BD scientist will also be on hand to help aim your lights and recommend the ultimate lighting setup for your vehicle. Bluetorch Fabworks owner and racer, Jason Carner says, “We are all really excited for this year’s KOH, and even though we hope we won’t have to use our BD lights for this race, we always know we have the best in the business.”
The new OnX motorcycle mount allows you to harness the unsurpassed distance and smooth spread of the Baja Designs OnX 8” LED light bar on your motorcycle. Now you can easily mount the 8” OnX LED bar to your stock handle bar mount and achieve more light than ever available, as well as easy aim and go adjustability. After years of engineering and advances in LED technology we at Baja Designs can proudly say that our LED lights are officially the future of off road racing. The new OnX LED Light Bar is the only light bar on the market that has the distance of an 8” HID with the smooth spread of an LED. Each OnX M/C light offers a concentrated beam of 3600 lumens. Countless hours of testing and preparation have ensured that the OnX is be perfect for racers and enthusiasts that need a vast amount of light at high speeds. The OnX utilizes a Cree XML T6 Bin LED at 5000k, which will be complimented by our one of a kind user changeable optics that have been specifically designed for the OnX’s HID like distance projection. If you’re looking for the guaranteed farthest projecting LED light on the market, look no further.
Baja Designs the Scientists of Lighting - are proud to be the official lighting sponsor of Jeepspeed 2013. Since 2001 Jeepspeed has been providing the world with an amazing race class unlike any other. “After attending the 2000 Dakar Rally we returned with the concept of an affordable off road race & rally type class here in the United States. With Dakar suspension wheel travel limits but using American built Jeep vehicles, Jeepspeed was born.” – (Jeepspeed) Baja Designs could not be happier to be involved with the Jeepspeed class and provide all of its racers with the best lighting solutions possible. Our new OnX LED light bar was introduced late this year and has begun to make a huge impact in off-road racing. “Racers can now have the distance of an HID with the smooth spread of an LED”, say’s owner and head engineer Alan Roach. Jeepspeed racers and enthusiasts will have Baja Designs standing by them for support with the newest in LED technology as well as educational information on optimal lighting set-ups and aiming. Please feel free to contact BD if you are participating in the 2013 Jeepspeed class and would like more information on LED/HID lighting for your vehicle.